Parts & Accessories

Stick a Stix on it. This fabric clip mount makes it a cinch to clip your Specialized Stix to a bag, jacket, or jersey for on-the-go visibility. - Stainless steel spring clip for secure mounting.

Easily mount the Specialized Stix to your helmet with this Stix Helmet Strap mount that attaches securely through your helmet's vents. - Allows Stix light to be mounted horizontally or vertically. - Includes hook-and-loop strap to securely mount to helmet through vents.

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

End Plug For Femto USB and Stvzo Femto USB Front

Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.

Quick mount helmet bracket for headlights

This mounting strap is a replacement mounting strap for Lezyne's Year 10 Deca XXL and Super XXL LED lights (each sold separately).

Multi-use LED safety band By day, it’s a mild-mannered pant strap but when the sun goes down it transforms into the BRT Strap! The BRT stands for BRIGHT and our little LED safety band can be used as a pant strap, arm band or dog collar. Strap it to anything and you’ll be sure to get noticed whether you’re on your bike, out for a jog or taking Rover for an evening stroll.

All the parts needed to mount a Flux Expert headlight to a second bike - Includes axle, handlebar clamp, stainless screws and 3mm Allen key. - The clamp will fit 25.4mm and 31.8mm bar diameters with included rubber grip pads.

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.

Magnetic, Composite Matrix seatpost mount for the Lezyne Stick Drive and Stick Drive StVZO LED bike lights. Comes with two different o-rings for a variety of bicycle seatpost sizes.

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

Replacement Micro USB recharging cable for Lezyne Macro Drive, Mini Drive XL, Power Drive XL, and Super Drive XL LED Lights.

With the Stix Saddle mount, a Specialized Stix tail light can be easily mounted under any saddle featuring SWAT-compatible mounting holes. - Mounts a Stix tail light horizontally under the back edge of a SWAT-compatible saddle. - Includes stamped aluminum bracket that can be bent to adjust the light's angle. - This mount features a snap-in, breakaway mount to protect light if snagged. - Will only work with Specialized saddles with SWAT-compatible mount holes in the base. - Includes mounting hardware.

This replacement part secures a Specialized Stix light but will break free to protect light if snagged or pulled too hard. - This replacement part works with the following Stix mounts: Stix Helmet Mount, Stix Saddle Mount, and Stix Reflector Mount

This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

End Plug For Femto USB and Stvzo Femto USB Rear

Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

Setup your Light & Motion Urban or Deckhand light (sold separately) wherever you can connect a GoPro mount. Use this adapter to connect your Urban or Deckhand to any GoPro mounting option.

Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack. - Vertical CPSC hole pattern. - This mount can attach to the Horizontal Din hole pattern. - Specialized single hole pattern for the Pizza Rack. - Mounts Stix light horizontally. - Includes all mounting hardware.

All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

- Versatile LED and accessories forward mount - Bolts directly to stem faceplate - Included Aluminum Fork Mount, spacer and screw set - Suitable for most Lezyne most E-Bike front lights (Macro, Power, Power Pro, Micro, Hecto)

Replacement rubber end plug for the KTV Front, KTV Rear and KTV Pro Rear lights.

Replacement rubber end plug for the Hecto Drive, Micro Drive or Mini Drive lights.

Looking to take your second-generation Flux headlight off-road? You're going to need a helmet mount. - Breakaway design prevents snagging on overhead objects - Hook-and-loop strap can be reoriented 90 degrees to give additional mounting options - Fore/aft adjustability for optimal placement regardless of helmet vents - Action camera style hinge works with third-party mounts

This mount is designed to securely attach your Light and Motion Vis 180 Micro taillight to your bicycle.