Lighting

Topeak's Tail Lux helmet light mounts to any helmet or Topeak bag or rack with ease. Its constant and blinking modes ensure you'll be seen. A nice supplement to your regular light set, the Tail Lux is a convenient way to add extra safety to your commute. Plus, the coin battery is included.

- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install

Replacement LED assembly for the Centro LED helmet.

Serious road riders put in serious miles. Most of those miles occur in the daytime, when bright ambient conditions mean you need huge lumens numbers to be seen by motorists. But there's no reason a super-bright taillight can't look the part on the fastest road bikes. You invest in the best road bike technology--you deserve an equally fast taillight. Packing a huge punch with 250 lumens, the Flux 250R taillight is visible at more than 1 mile (1.5 km) in the brightest daytime conditions. Here in Morgan Hill, California we get those conditions all the time, this is the taillight we made for ourselves, and for you. - Designed to fit round and D-shaped seatposts. - Disco Flash mode: 250 lumens for 8:00 hours - Eco Flash mode: 25 lumens for 60:00 hours - Hybrid spherical lens and Fresnel lens over three high-power LEDs to send lumens for mile, or kilometers. - IPX7 waterproof means this light will be there when you need it, even in the hardest rain. - Includes 3 different size EPDM o-rings to fit a wide variety of seatposts. 2 o-rings included per size for spares. - Massive 1000mAh battery recharges via included micro USB cable in 2:15 hours. - Overmolded bezel for excellent side visibility. - Power Flash mode: 250 lumens for 8:00 hours - Steady High mode: 100 lumens for 3:00 hours - Steady Low mode: 25 lumens for 12:00 hours - Three CREE XBD 901 LEDs for maximum brightness and efficiency.

Looking to take your second-generation Flux headlight off-road? You're going to need a helmet mount. - Breakaway design prevents snagging on overhead objects - Hook-and-loop strap can be reoriented 90 degrees to give additional mounting options - Fore/aft adjustability for optimal placement regardless of helmet vents - Action camera style hinge works with third-party mounts

All the parts needed to mount a Flux Expert headlight to a second bike - Includes axle, handlebar clamp, stainless screws and 3mm Allen key. - The clamp will fit 25.4mm and 31.8mm bar diameters with included rubber grip pads.

This replacement part secures a Specialized Stix light but will break free to protect light if snagged or pulled too hard. - This replacement part works with the following Stix mounts: Stix Helmet Mount, Stix Saddle Mount, and Stix Reflector Mount

Day or night, the Stix Elite headlight packs a powerful punch. Running in Steady-High mode at night, it delivers 100 lumens of focused, strong, and bright light to guide your way. It’s a true to-see-by headlight. During the day, your visibility and safety becomes its first priority. Running in Power Flash mode, this tiny package delivers 200 lumens-worth of, “see me now,” light, making it a beacon for all road users. And depending on the chosen mode, the Stix Elite will run for up to 112 hours, and it’s easily charged via built-in USB tab, which eliminates the need for a cable. - 12 to 200 lumens output - Spherical lens delivers a to-see-by beam pattern. Fresnel lenses for secondary LEDs provide wide angle visibility - 2.5- to 112-hour runtime - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed) - Flexible mounting system works with handlebars from 22.2mm up to 35mm in diameter - Six modes including: Steady High (100 lumens), Steady Low (38 lumens), Power Surge (97 lumens), Power Flash (200 lumens), Disco Flash (63 lumens), Eco Flash (12 lumens) - Red/Green battery charge level indicator - Additional mounting options available separately

Nothing says, “see me now,” louder than a strong and bright taillight, both for day or nighttime use. With its spherical lens, which directs lumens more than a 1/2 mile (800m) in the brightest California sun, the Stix Elite taillight is the go-to taillight for our infamous Lunch Ride. It’s all about peace of mind, really, and with its six light modes, you get multiple options for day or night visibility. And depending on the chosen mode, this taillight will run for up to 77 hours, and it’s easily charged via built-in USB tab, which eliminates the need for a cable. - 12 to 100 lumens output - Dome lens concentrates output from CREE XBD P4 center LED for 1/2 mile (800m) visibility in the brightest sun. Fresnel lenses for secondary LEDs provide wide angle visibility - 2.5- to 77-hour runtime - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed) - Flexible mounting system works with seatposts from 22.2mm up to 35mm in diameter, plus it's compatible with most seatstays (Aero strap mount available separately) - Six operating modes: Steady High (50 lumens), Steady Low (18 lumens), Power Surge (37 lumens), Power Flash (100 lumens), Disco Flash (40 lumens), Eco Flash (12 lumens) - Red/Green battery charge level indicator - Additional mounting options available separately

Stick a Stix on it. This fabric clip mount makes it a cinch to clip your Specialized Stix to a bag, jacket, or jersey for on-the-go visibility. - Stainless steel spring clip for secure mounting.

Easily mount the Specialized Stix to your helmet with this Stix Helmet Strap mount that attaches securely through your helmet's vents. - Allows Stix light to be mounted horizontally or vertically. - Includes hook-and-loop strap to securely mount to helmet through vents.

Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack. - Vertical CPSC hole pattern. - This mount can attach to the Horizontal Din hole pattern. - Specialized single hole pattern for the Pizza Rack. - Mounts Stix light horizontally. - Includes all mounting hardware.

With the Stix Saddle mount, a Specialized Stix tail light can be easily mounted under any saddle featuring SWAT-compatible mounting holes. - Mounts a Stix tail light horizontally under the back edge of a SWAT-compatible saddle. - Includes stamped aluminum bracket that can be bent to adjust the light's angle. - This mount features a snap-in, breakaway mount to protect light if snagged. - Will only work with Specialized saddles with SWAT-compatible mount holes in the base. - Includes mounting hardware.

Multi-use LED safety band By day, it’s a mild-mannered pant strap but when the sun goes down it transforms into the BRT Strap! The BRT stands for BRIGHT and our little LED safety band can be used as a pant strap, arm band or dog collar. Strap it to anything and you’ll be sure to get noticed whether you’re on your bike, out for a jog or taking Rover for an evening stroll.

Safety bike lights that are cute as a button The Button Blinky Safety Set provides a quick way to keep you visible on your next bike ride. Two high-output LEDs give you steady and flashing modes with 160° of visibility. These little lights are brilliant, easy to mount, and cute as a button! Button Blinky front specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 12 hrs (steady – 15 lm) and up to 40 hrs (flashing - 15 lm) - Provides 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams Button Blinky rear specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 20 hrs (steady – 4 lm) and up to 50 hrs (flashing - 4 lm) - Provide 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams

Quick mount helmet bracket for headlights

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

The NiteRider Lumina 1200 Boost provides enough light that it can be used in just about all riding conditions, whether it be on the road, on your favorite mountain biking trail, or hand-held in Walk Mode. Specifically designed to meet the needs of riders in all cycling categories, the Lumina 1200 Boost features the Boost Mode light setting. Simply double click the power button, giving you the option to operate your light at maximum light output! And utilizing a CREE LED at 6000k, means you’ll get what most consider to be the best LEDs available on the market today. These high performance LEDs are extremely reliable, with no filament to break or burn out. With the all new custom engineered collimator optics, the Lumina 1200 Boost projects a beam pattern that provides a generous widespread and even beam pattern of 1200 brilliant lumens! The high-strength head light body casing is comprised of lightweight aluminum and Dupont Fiberglass reinforced nylon that is highly durable. The NiteRider Solas 250 uses two powerful LEDs to produce an amazing 250 lumens of light output. It features 4 modes (2 flash / 2 steady) and is USB rechargeable. We’ve implemented what we call “Group Ride Mode” for cyclists who want to stay visible but not distract others in the pack. LUMINA 1200 BOOST - All New Collimator Lens, distributes a generous even widespread beam pattern - Boost Mode, double tap power button to unleash maximum LED output at 1200 lumens! - 5 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Perfect for helmet mounting (Helmet Mount sold separately) - IntelliCharge – Reduce charge time in half! - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. SOLAS 250 - Daylight Visible Flash (DVF) - 250 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - Convenient USB rechargeable - Super bright daytime flash mode - Be Seen by cars = Be Safe - FL1 Standard IP64, dust and water-resistant WARRANTY - The Lumina 1200 Boost and Solas 250 are both backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LUMINA 1200 BOOST - LED Light Head - Internal Li-Ion Battery - Handlebar Clamp Mount (Fits up to 35mm) - USB Charging Cable SOLAS 250 - LED Tail Light - Seatpost Mount - USB Cable

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 2500 - Battery: Li-Ion - Recharge Type: USB

The NiteLink remote allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. - All New design equipped with NiteLink Wireless Technology - Lights sold separately

NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. Lumina Max headlight and NiteLink Remote sold separately. - Maximum 300-lumen output - Run time: 6:00—36:00hrs - Charge time: 2:15hrs - Group Ride Mode: Be seen without distracting fellow cyclists - 2 light levels, 3 flash modes - FL1 Standard IP64 Water Resistant - 79g Includes: - Daylight visible tail light, easy on/off seatpost strap mount, and USB charging cable

Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

The NiteRider Sentry Aero 260 is a lightweight, aero taillight featuring dual LED light strips to deliver 260 lumens of Daylight Visible red light. An inner and outer lens design helps to shape light output, producing long-range visibility when viewed directly from the rear, but also providing ample surrounding light to the peripheral, making the Sentry Aero 260 visible from nearly any angle. - Daylight Visible Flash (DVF) - 260 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off Aero seat post strap mount with quick release tab - Aero seat post strap included - Convenient USB rechargeable - Super bright Daylight Visible Flash mode - Innovative Aero shape with excellent side visibility - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentry Aero 260 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seat post Mount - USB Cable

The Swift 300 gives you more than enough lumens at our lightest weight for headlights (82 grams). NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. The Swift 300 features a highly durable light housing with Dupont Fiberglass reinforced nylon meeting all required FL1 Standards for impact testing and water / dust resistance. Vmax+ 150 is NiteRider's first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light-easily clipping onto straps, belt loops, and more. SWIFT 300 FRONT LIGHT FEATURES - Lumen Output: 300 - 5 Modes with Run Times: 2:00 – 28:00h - Charge Time: 2:00h at greater than 500mA | 3:15h at 500mA - Water / Dust Resistant IP64 Rated - USB Rechargeable SWIFT 300 TYPICAL RUN TIMES Low—15:00h at 80 Lumens Med—9:00h at 150 Lumens High—2:00h at 300 Lumens Flash—12:00h at 300 Lumens Walk—28:00h at 20 Lumens Vmax+ 150 TAILLIGHT FEATURES - Lumen Output: 150 - 6 Modes with Run Times: 5:30-27:30h - Charge Time: 2:00h - Water / Dust Resistant IP64 Rated - USB-C Rechargeable Vmax+ 150 TYPICAL RUN TIMES Fast Flash—12:45h Slow Flash—10:15h Disco Flash—10:45h Pulse Flash—7:00h High Steady—5:00h Low Steady—27:00h

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL